Page 8 - 2016-v.1-Part 8(EN)
P. 8
TBIS 4210-8:2016
Key
1 rigid mount
Figure 1 — Pedal/pedal-spindle assembly — Static strength test
4.2 Pedal — Impact test
Screw the pedal-spindle securely into a suitable rigid fixture with its axis horizontal as shown in Figure 3
and release a striker of the design shown in Figure 2 and mass of 15 kg from a height of 400 mm to strike
the pedal at the centre of the pedal. The width of the striker shall be wider than the width of the tread
surface.
NOTE See TBIS 4210-3:2016, Annex B.
2
