Page 15 - TBIS_15194-2019_(EN)_3nd

TBIS 15194:2019

3.40 integrated charger

charger which is a part of the bicycle and needs tools to be disassembled from it.

3.41 electrical control system

electronic and/or electrical component, or an assembly of components provided for
installation into a vehicle, together with all electrical connections and associated
wiring for the engine electrical power assistance.

3.42 lowest gear

gear ratio which gives the shortest distance travelled for one rotation of the cranks

3.43 maximum inflation pressure.

maximum tyre pressure recommended by the tyre or rim manufacturer for a safe

and efficient performance.
Note to entry: If the rim and tyre both indicate a maximum inflation pressure, the

maximum inflation pressure is the lowest of the two pressures indicated.

3.44 maximum saddle height

vertical distance from the ground to the point where the top of the seat surface is
intersected by the seat-post axis, measured with the seat in a horizontal position and
with the seat-post set to the minimum insertion-depth mark.

3.45 maximum assisted speed by design

maximum designed speed up to which assistance is provided.

3.46 minimum insertion-depth mark

mark indicating the minimum insertion-depth of handlebar stem into fork steerer

(fork stem) or seat-post into frame.
3.47 narrow-band emission

emission which has a bandwidth less than that of a specific receiver or measuring
instrument.

3.48 no load current point

current for which there is no torque on the driving wheel.

3.49 off-road rough-terrain

coarse pebble tracks, forest trails, and other general off-road tracks where tree-roots
and rocks are likely to be encountered.

第 7 頁共 162 頁