Page 27 - TBIS_15194-2019_(EN)_3nd

TBIS 15194:2019

4.2.15 Electro Magnetic Compatibility

4.2.15.1 Emission

The EPAC and ESA shall fulfil the requirements of Annex C.

4.2.15.2 Immunity

The EPAC and ESA shall fulfil the requirements of Annex C.
4.2.15.3 Battery charger

As an EPAC is not intended to be used while charging on the electric network, for
integrated charger the whole EPAC plus integrated charger shall be tested for EMC

according to the applicable standards based on the European EMC directive.
NOTE The following European Standards are applicable for battery chargers to be
used in residential
environment: EN 55014–1, EN 55014–2, EN 61000–3-2, EN 61000–3-3.

4.2.16 Failure mode

4.2.16.1 Requirements

It shall be possible to ride the EPAC by pedalling even if the assistance failed.
This requirement shall checked as described in 4.2.16.2.

4.2.16.2 Test method
a) Remove or disconnect the battery pack,
b) Ride the bicycle up to 10 km/h

第 19 頁共 162 頁