Page 136 - TBIS_15194-2019_(EN)_3nd

TBIS 15194:2019

quasi-peak detector.
C.2.2 Test method
C.2.2.1 General

C.2.2.2 Test conditions

According to EN 55012.
C.2.2.3 State of the EPAC during the test

Apply a load in order to test at 75 % ± 10 % of the continuous rated power declared
by the manufacturer.

NOTE 1 It is possible to achieve the load by braking, home trainer.

NOTE 2 For example, it is possible that the test be performed when the engine is running
alone or when the driver on it using the brake.
C.2.2.4 Antenna type, position and orientation

According to EN 55012.

C.2.3 Measurement
According to EN 55012.

C.3 Method of measuring narrow band electromagnetic radiation from EPAC
C.3.1 General

C.3.1.1 Measuring equipment

An average-value detector is used to measure narrow-band electromagnetic
radiation.

NOTE The measuring equipment is described in EN 55012.
C.3.1.2 Test method

According to EN 55012.
C.3.1.3 Test conditions

According to EN 55012.

C.3.1.4 State of the EPAC during the tests
Apply a load in order to test at 75 % ± 10 % of the continuous rated power declared

by the manufacturer.
NOTE 1 It is possible to achieve the load by braking, home trainer.

NOTE 2 For example, it is possible that the test be performed when the engine is running
alone or when the driver on it using the brake.

C.3.2 Antenna type, position and orientation
According to EN 55012.

第 128 頁共 162 頁